1968 Whitby ALBERG 30 $ 6,400.00



This Alberg 30 has been here on the lake for the last 6 years. It is here in our yard, and available for viewing.

The Alberg 30 is one of the All American classics. It was designed by Carl Alberg and built by Whitby Boatworks in Ontario, Canada.   They built the first one in 1965 and by the time they finished the last in 1986 they had built over 700. 

This boat is known for its rugged construction, classic styling, seaworthy design, and admirable sailing qualities.  It has a traditional, moderate-displacement hull with relatively narrow beam, steep entry with cutaway forefoot, wineglass hull sections with easy chine, full garboard, traditional long keel and attached rudder. The topside has long overhangs with a spoon bow, moderate freeboard with a well-rockered sheer and long counter stern.  It has a long foredeck, wide side decks and short aft deck, with a trunk cabin transitioning into a raised doghouse at mid-length and aft cockpit. 


The class has an active, enthusiastic, helpful, and friendly owners association.  





ModelALBERG 30
Model Year1968
Hull MaterialFiberglass
YachtWorld ID3229630
LocationGilford, NH, US
Drive TypeDirect
Boat NameAnadyne


Length Overall30.25
Beam8.75 ft
Max Draft4.25 ft
Drive Up4.25 ft
Ballast Weight3,300 lb
Displacement9,000 lb
Boat KeelFull Keel


Fuel Tank Capacity12|gallon
Water Tank Count1
Water Tank Capacity20|gallon


Number of single berths2
Number of double berths2
Number of cabins2
Number of heads1
Total Engine1

Engine: 1

ModelAtomic 4
Drive TransmissionDirect
Propeller Type3 Blade, Bronze


Year:  1968

Keel: FullLOA: 30 ft 3 inBeam: 8 ft 9 inMinimum Draft: 4 ft 3 inMaximum Draft: 4 ft 3 inDisplacement: 9000 lbsBallast: 3300 lbs




One Hood Genoa 140% 1987

One Genoa 180% 1990

One fully battened Hood Main Sail 1983.

One fully battened North Main Sail with reef point 1969.

One Spinnaker (yellow) 1977

New Main Sail cover 2006.

Deck Hardware and Rig


Roller furling Jib

Boom roller furling for Main

All deck hardware is original.

There are 2 PVC winch handle holders in the cockpit, 3 locking winch handles, one 8main halyard, and two 12 main sheets.

There is a winch handle for the roller boom.

Dodger, Oakum Bay


This custom dodger allows access to below deck without having to double over.



Brand new engine in June 2006.  Runs well.

Universal Atomic 4, 30 HP, 6 KNTS cruising speed, Indigo pointless electronic ignition.

Aluminum 12 gallon vented tank, under Starboard Cockpit Seat, replaced June 1996.

12 volt, 55 Amp Alternator installed May 2013,

Propeller, Shaft, Skeg. 13 d. x 7p. 2 blade bronze shaft replaced 1992.



Alcohol Stove

Freshwater capacity: 20 gallons under V Berth, forward

Ice box volume 4.6 CU FT.




Currently, there is a sink with whale pump and a Jabsco electric pump and faucet, there is no overboard gray water discharge and the marine head has been replaced with a Porta Potti. All plumbing is intact for reinstallation of a marine head and overboard discharge.




Headroom: 64

4 Adults in (2) Separate Cabins main bunks 68 X 46. in main cabin.

Bow area can be converted into a single V berth for 2 adults. The main cushions were replaced in 2007, the color is blue.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. customContactInformation

Fay's Boat Yard, Inc.

Gilford, NH  03249



  • Date Format: MM slash DD slash YYYY
  • :